B-1A EPDM - SecurEdge 200

B-3A EPDM - Deck-to-Deck Expansion Joint

MF-1A EPDM - SecurEdge 200

MF-2.1 EPDM - Mechanically Fastened EPDM Securement - Option 1

MF-2.2 EPDM - Mechanically Fastened EPDM Securement - Option 2 (RUSS)

MF-2.3 EPDM - Mechanically Fastened EPDM Securement - Option 3 (RUSS)

MF-2A EPDM - Mechanically Fastened EPDM Membrane Splice

MF-2A.1 EPDM - Mechanically Fastened EPDM Membrane Splice (25/30 Warranties)

MF-2B EPDM - Mechanically Fastened EPDM Membrane Splice Intersection

MF-2B.1 EPDM - Mechanically Fastened EPDM Membrane Splice (25/30 Warranties)

MF-2D EPDM - End Lap Splice

MF-6B EPDM - Roof Drain with Sump

MF-8A EPDM - Pressure Sensitive Pipe Seal

MF-8A.1 EPDM - Pressure Sensitive Pipe Seal with 20" Pressure Sensitive Cured Flashing

MF-8B EPDM - Field Fabricated Pipe Wrap

MF-8B.1 EPDM - Field Fabricated Pipe Wrap (25/30 Warranties)

MF-22 EPDM - Ridge Membrane Attachment

U-1A EPDM - SecurEdge 200

U-1A.1 EPDM - SecurEdge 200 (25/30 Warranties)

U-1B EPDM - SecurEdge 300

U-1B.1 EPDM - SecurEdge 300 (25/30 Warranties)

U-1C EPDM - SecurEdge 2000 & 3000

U-1D EPDM - SecurEdge Drip Edge Fascia

U-1D.1 EPDM - SecurEdge Drip Edge Fascia (25/30 Warranties)

U-1E EPDM - SecurEdge One-Piece Gravel Stop

U-1F EPDM - Metal Bar Edge Termination

U-2A EPDM - EPDM Membrane Splice

U-2A.1 EPDM - EPDM Membrane Splice (25/30 Warranties)

U-2B EPDM - EPDM Membrane Splice Intersection

U-2B.1 EPDM - EPDM Membrane Splice Intersection (25/30 Warranties)

U-2C EPDM - EPDM Membrane Splices at Angle Change

U-3A EPDM - Deck-to-Deck Expansion Joint

U-3B EPDM - Deck-to-Wall Expansion Joint

U-3C EPDM - Shear/Expansion Joint

U-5A EPDM - Curb Flashing - EPDM Membrane

U-5B EPDM - Curb Flashing - Pressure Sensitive Curb Wrap with 6" Tape

U-5C EPDM - Curb Flashing - With 20" Pressure Sensitive Cured Flashing

U-5D EPDM - Self-Flashing Curb

U-5E EPDM - New Self-Flashing Metal Curb

U-6A EPDM - Roof Drain

U-6B EPDM - Roof Drain - Reinforced Field Sheet with Sump Exceeding 3" per foot

U-6C EPDM - Sure-Seal Insert Drain

U-6D EPDM - Insert Drain Through Deck

U-6E EPDM - Sure-Seal Add-On Drain

U-8A EPDM - Pressure Sensitive Pipe Seal

U-8A.1 EPDM - Pressure Sensitive Pipe Seal with 90-mil Membrane or 25/30 Year Warranties

U-8B EPDM - Field Fabricated Pipe Wrap

U-8B.1 EPDM - Field Fabricated Pipe Wrap (25/30 Year Warranties)

U-8C EPDM - Flexible Penetration

U-8C.1 EPDM - Flexible Penetration (25/30 Year Warranties)

U-8D EPDM - Field Fabricated Hot Stack

U-8D.1 EPDM - Field Fabricated Hot Stack (25/30 Year Warranties)

U-9 EPDM - Membrane Terminations, PAGE 1 OF 2

U-9 EPDM - Membrane Terminations, PAGE 2 OF 2

U-12A EPDM - Parapet/Curb with Continuous Membrane

U-12B EPDM - Parapet/Curb with Separate Membrane

U-13A EPDM - Built-Up Roofing Tie-In Over Steel Roof Decking

U-13B EPDM - Built-Up Roofing Tie-In Over Concrete Roof Decking

U-13C EPDM - Tie-In to Existing EPDM Membrane

U-13D EPDM - EPDM Tie-In Over Concrete Deck

U-13E EPDM - Tie-In Shingled or Metal Panel Roof

U-13F EPDM - Tie-In Between New Carlisle Adhered & Ballasted Roof

U-13G EPDM - Tie-In Between New Carlisle Mechanically Fastened & Ballasted Roof

U-15A EPDM - Inside Corner Wall Flashing with RUSS (Option 1)

U-15B EPDM - Inside Corner Wall Flashing with RUSS (Option 2)

U-15C EPDM - Inside Corner with Continuous EPDM Wall Flashing

U-15D EPDM - Inside Corner with Separate EPDM Wall Flashing

U-15D.1 EPDM - Inside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties

U-15E EPDM - Outside Corner with Pre-Cut Pressure Sensitive Corner

U-15F EPDM - Outside Corner with Pressure Elastoform Flashing (2 Piece)

U-15G EPDM - Outside Corner with Pressure Elastoform Flashing (1 Piece)

U-15G.1 EPDM - Outside Corner Flashing for Projects with 90-mil Membrane or 25/30 Year Warranties

U-16A EPDM - Pressure Sensitive Pourable Sealer Pocket

U-16A.1 EPDM - Pressure Sensitive Pourable Sealer Pocket (25/30 Year Warranties)

U-16B EPDM - Field Fabricated Pourable Sealer Pocket

U-16B.1 EPDM - Field Fabricated Pourable Sealer Pocket (25/30 Year Warranties)

U-16C EPDM - Extended Pourable Sealer Pocket

U-16C.1 EPDM - Extended Pourable Sealer Pocket (25/30 Year Warranties)

U-18A EPDM - Metal Scupper at Deck

U-20A EPDM - Lightning Rod at Parapet (Vertical Attachment)

U-20B EPDM - Lightning Rod at Deck Level

U-22 EPDM - Valley

U-24 EPDM - Sleeper

U-30 EPDM - I-Beam Penetration

FB-1B.1 - Coated Drip Edge Fascia - TPO, PVC or KEE HP

FB-1C.1 - Metal Bar Edge Termination

FB-1D.1 - SecurEdge 200

FB-1E.1 - SecurEdge 300

FB-1F.1 - SecurEdge 2000 & 3000

FB-2A - EPDM Membrane Splices - Projects with 10, 15, & 20 Year Warranties

FB-2A.1 - EPDM Membrane Splices - Projects with 145mil Membrane or 25/30 Year Warranties

FB-2B.1 - Thermoplastic Membrane Splices

FB-3A.1 - Deck-to-Deck Expansion Joint

FB-3B.1 - Deck-to-Wall Expansion Joint

FB-6A.1 - Roof Drain with Continuous Membrane

FB-6B.1 - Roof Drain with Separate Target Splice

FB-8A.1 - Pre-Molded Pipe Seals

FB-8B - Field Fabricated Pipe Flashing

FB-9 - Membrane Terminations (PAGE 1 OF 2)

FB-9 - Membrane Terminations (PAGE 2 OF 2)

FB-12A.1A - Parapet/Curb with Separate Membrane - Full Coverage

FB-12A.1B - Parapet/Curb with Separate Membrane - Bead Applied

FB-12B.1A - Parapet/Curb with Continuous Membrane - Full Coverage

FB-12B.1B - Parapet/Curb with Continuous Membrane - Bead Applied

FB-12C - Parapet/Curb with Water Based Adhesive

FB-15A.1 - EPDM Pressure Sensitive Inside Corner

FB-15B.1 - EPDM Pressure Sensitive Outside Corner

FB-15C.1 - Thermoplastic Pre-Molded Inside Corner

FB-15D.1 - Thermoplastic Pre-Molded Outside Corner

FB-16A.1 - EPDM Pressure Sensitive Pourable Sealer Pocket

FB-16B.1 - Thermoplastic Molded Sealant Pocket

FB-18A.1 - Through-Wall Scupper with Pressure Sensitive EPDM Flashing

FB-18B.1 - Through-Wall Scupper with SecurWeld or Sure-Flex Metal

FB-25.1 - Simulation of Metal Roof in Thermoplastic Membranes

FB-27 - Fleeceback Membrane Attachment Using Bead Adhesive

MF-2 PVC-TPO - Membrane Securement

MF-2.1 TPO - TPO Membrane Pressure Sensitive RUSS

MF-2A PVC-TPO - Membrane Splice

MF-2B PVC-TPO - Thermoplastic Membrane Splices

MF-8BT TPO

MF-22 PVC-TPO - Ridge Membrane Attachment

U-1A TPO - SecurSeal Drip Edge Fascia

U-1B PVC-TPO - SecurWeld Coated Drip Edge Fascia

U-1C PVC-TPO - Metal Bar Edge Termination

U-1D PVC-TPO - SecurEdge 200

U-1E PVC-TPO - SecurEdge 300

U-1F PVC-TPO - SecurEdge 2000 & 3000

U-1G PVC - Pressure Sensitive PVC/KEE HP Cover Strip

U-2A PVC-TPO - Membrane Splice

U-2B TPO SAT - Thermoplastic Membrane Splice

U-3A PVC-TPO - Deck-to-Deck Expansion Detail

U-3B PVC-TPO - Deck-to-Wall Expansion Detail

U-5A PVC-TPO - Curb Flashing with TPO or PVC Membrane

U-5B PVC-TPO - Curb Flashing with TPO or PVC Coated Metal

U-5C PVC-TPO - Curb Flashing with CFA TPO or PVC Curb Wrap Corners

U-5D PVC-TPO - Self-Flashing Curb with CFA TPO or PVC Curb Wrap Corners

U-6A PVC-TPO - Roof Drain (Drain Sump Up to 3" to 1 Horizontal foot)

U-6B PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot)

U-6C PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 1 of 2

U-6C and U-6C.1 PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 1 of 2

U-6C.1 PVC-TPO - Roof Drain (Drain Sump Greater than 3" to 1 Horizontal foot) - Option 2, Page 2 of 2

U-6D PVC-TPO - Add-On Drain

U-8A PVC-TPO - Pre-Molded Pipe Flashing

U-8B PVC-TPO - Field Fabricated Pipe Flashing

U-8C PVC-TPO - CFA Certified Pre-Fabricated Square Tube Wrap

U-8D PVC-TPO - Field-Fabricated Square Tube Flashing

U-8E PVC-TPO - CFA Certified Pre-Fabricated Split Pipe Seal

U-8F PVC-TPO - CFA Certified Hot Pipe Flashing

U-9 PVC-TPO - Membrane Terminations, PAGE 1 AND 2

U-9 PVC-TPO - Membrane Terminations, PAGE 1 of 2

U-9 PVC-TPO - Membrane Terminations, PAGE 2 of 2

U-12A PVC-TPO - Parapet Flashing - Fastened Into Deck

U-12A.1 PVC-TPO - Parapet Flashing - Fastened Into Wall

U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 AND 2

U-12B TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 1 of 2

U-12B.1 TPO - Parapet Flashing with Pressure Sensitive RUSS, PAGE 2 of 2

U-12C PVC-TPO - Coated Metal Wall Flashing

U-12F PVC-TPO - Parapet Flashing/No Adhesion - Any Height Option

U-12G TPO SAT - TPO SAT Parapet Flashing with TPO RUSS (SAT, Self Adhereing Technology)

U-12H TPO SAT - TPO SAT Parapet Flashing with TPO SAT RUSS (SAT, Self Adhereing Technology)

U-13A TPO - TPO Tie-In to Built-Up Roofing Over Steel Roof Deck

U-13B TPO - TPO Tie-In to Built-Up Roofing Over Concrete Roof Deck

U-13C PVC-TPO - TPO/PVC Tie-In to Existing Single-Ply

U-13D TPO - TPO Tie-In to Existing EPDM Membrane

U-13E TPO - EPDM Tie-In on Concrete Deck

U-13F PVC-TPO - TPO/PVC Tie-In to Shingled or Metal Panel Roof

U-13G PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Concrete Deck

U-13H PVC - PVC/KEE HP Tie-In to Existing Single-Ply Roof Membranes on Metal Deck

U-15A PVC-TPO - Pre-Molded Inside Corner Flashing

U-15B PVC-TPO - Field Fabricated Inside Corner Flashing

U-15C PVC-TPO - Inside Corner with Coated Metal Wall Flashing

U-15D PVC-TPO - Pre-Molded Outside Corner Flashing

U-15E PVC-TPO - Field Fabricated Outside Corner Flashing

U-15F PVC-TPO - Outside Corner Flashing with Coated Metal Wall Flashing

U-15G PVC-TPO - PVC or TPO: Universal Corners - Combination Inside & Outside Corners

U-15GT TPO

U-16A PVC-TPO - Molded Sealant Pocket

U-18A PVC-TPO - Scupper with Coated Metal

U-18B TPO - Scupper at Deck - TPO

U-18C PVC - Scupper with Sure-Flex Non-Reinforced PVC/KEE HP Flashing

U-18D PVC - Scupper with Sure-Flex PVC/KEE HP PS Cover Strip Flashing

U-20A PVC-TPO - Lightning Rod at Parapet (Vertical Attachment)

U-20B PVC-TPO - Lighting Rod at Deck Level

U-24 PVC-TPO - Sleeper Detail

U-25A PVC-TPO - Contour Rib Typical Cross-Section

U-25B PVC-TPO

U-25C PVC-TPO